Solar Panel Installation – Explained

Having your own solar panel installation will not only save you money on your electric bill, but it will also help the environment. The process is not much different from other home improvement projects. There are several things you will need to prepare before you begin, however. Depending on the type of system you have, you may also need special instructions. You should also get a quote from several solar installers to make sure you are getting the best price. Browse this site listing about Home Solar Installation
To install your solar panels, you will need to clear the area around the house. You should also check the roof for any obstructions or areas that may prevent sunlight from reaching the solar panels. You may also want to remove outdoor furniture or equipment to create a clear area for the work to be done.
Once you have cleared the area, you will need to install a mounting structure for the solar panels. This structure will support the base of the panels and provide tilting. This will allow for the maximum amount of sunlight to reach the solar panels. You will need to determine the distance between each of the mounting holes on the back of the panels. This information will be in the spec sheet for the panel you purchase.
You will also need to install the mounting rails. These rails are placed on the rafters of the roof and are spaced to align with the mounting holes on the solar panels. This racking system is standard with most of the packages you buy. The spacing of the rails will be specified on your racking report.
Once the solar panels are installed, you will need to connect the system to the city’s electric grid. This may involve climbing on the roof of your house. If you are able, you may want to use a ladder lift or scissor lift to help you reach the rooftop. You can also hire a contractor to do this work for you. This will save you a lot of time.
You will also need to connect the wires to the solar backfeed breaker. To do this, you need to attach properly stripped solar circuit wires to the breaker terminals. This may take a few minutes, but it is important to do it carefully. If you do not, your battery may be ruined.
The backfeed breaker will help you to monitor the amount of electricity the panels are producing. You can use this information to decide when to use your utilities. You can also test the performance of the system by checking how much electricity you are generating at different times of the day.
You will also need to connect the panels to your inverter. This may require you to install the inverter inside of your home, or you may opt to install it outdoors. The inverter is used to convert the solar energy into electricity, which you can then use to power your home.